The Hexatronic Viper 200 series of micro-cables are characterised by state of the art installation performance when installed by blowing into micro-ducts. Particularly, installations in access networks with difficult routes, which are facilitated by the enhanced performance of the Viper cables.

To enable installation into the smallest possible micro-ducts, the Viper 200 series is designed with 200 μm fibres.

All parameters such as cable diameter, sheath friction, cable stiffness etc. are optimised for best installation performance without compromising mechanical or environmental properties.

The micro-cables are based on a slim loose tube design with up to twelve tubes per cable. The design facilitates fibre preparation and mid-span access. The cables are suitable for long-distance, air-blown installation in micro-ducts, with an inner diameter of as little as 8-12 mm. The cables have excellent bend performance and an extremely wide operational temperature range.

Technical Information
Design: Loose tube, micro-cable 
Type: Dielectric, for micro-ducts 
Dimensions: Ø5.6-8.5 mm 
Capacity: 288 fibres 
Fibre type: G657A1, 200 µm
Lengths: 2000, 4000, 6000 m 

Product sheet 

Part numbers